Collector's Necklace
Designed by Molly Schaller for Halcraft USA, Inc.



Materials:
MSKU#10182337 iris sea foam 84 faceted glass 6mm rounds
MSKU#10174271 pyrite 13x18mm oval
MSKU#10174292 glass 14mm pearl
MSKU#10174281 black glass 18x25mm faceted oval
MSKU#10168521 2 brass square 7mm bead caps
MSKU#10168487 3 brass 3mm rounds
MSKU#10140100 glass 10x14mm faceted teardrop
MSKU#93962 aqua and black agate 46x22mm rectangle
109 matte bronze Toho seed beads
0005 761 UA 090 22" copper ball chain
0005 761 UA 090 2 copper ball chain ends
1 matte copper spring ring clasp with ring
6 brass eye pins
3 brass head pins
1 large matte brass jump ring
2 small matte brass jump rings
2 matte brass crimp tubes MSKU#10427062
22" Beadalon 49-strand .018" flexible beading wire

Tools: Chain-nose pliers, Round-nose pliers, Wire cutters

Instructions:
1. Onto the beading wire string 1 crimp tube, 14 matte brass seed beads and the loop of the spring ring. Pass the beading wire back through the crimp tube and flatten the tube using chain-nose pliers.
2. String 1 seed bead and 1 iris sea foam faceted glass round. Repeat this step 80 more times. String 1 seed bead.
3. String 1 crimp tube, 14 matte brass seed beads and the ring of the spring ring. Pass the beading wire back through the crimp tube and flatten the tube using chain-nose pliers. Trim excess wire.
4. Onto an eyepin slide 1 iris sea foam faceted glass round. Make a simple loop. Repeat this step two more times for a total of three sea foam links.
5. Onto an eyepin slide 1 pyrite oval; make a loop.
6. Onto an eyepin slide 13x18mm black glass faceted oval. Make a simple loop.
7. Onto an eyepin slide 1 3mm brass round, two brass square bead caps large end to large end and 1 3mm brass round. Make a simple loop.
8. Onto a headpin slide 1 glass pearl. Make a wrapped loop.
9. Slide a teardrop drop onto a head pin and make a wrapped loop.
10. Onto a headpin slide 1 3mm brass round and 1 aqua and black crystalloid agate rectangle. Make a wrapped loop.
11. Assemble the following dangles:

• black glass faceted oval link, sea foam link, glass pearl drop
• sea foam link, pyrite oval link, aqua and black crystalloid agate rectangle drop.
• brass square bead cap link, sea foam link, champagne faceted teardrop.

12. Open the large brass jump ring and slide onto it the loops of the topmost links and the spring ring. Close the jump ring.
13. Close a copper ball end cap over the end of the final ball of the copper ball chain. Repeat on first ball of copper ball chain.
14. Open a small brass jump ring and pass it through the hole in the end cap as well as the lop of the clasp. Close the jump ring. Repeat for opposite end of necklace.