|
Pearl & Stone Double-Strand Bracelet
|
|
|
Pink Pearls - #48084
Light Stone Spacers – Bead shop 1 Asst #56475
Dark Stone Spacers – Bead Shop 1 Asst #56475
Copper Star Spacers - #65346
Copper Focal Bead - #65066
Copper Toggle Clasp - #64806
Beading Wire
Copper Crimp Tubes - #66136
Beadalon® Crimping Tool
1. To make a 7.5” bracelet, begin by cutting two 10” lengths
of bead wire. Attach 1 length to the loop on the open end of the Copper
Toggle Clasp with the crimp tube. Attach the second length in the same
manner.
2. String half of each length of wire in the following pattern: 1-Copper
Star Spacer, 1-Round Light Stone Spacer, 1-Pearl, 1-Long Dark Stone Spacer,
1-Pearl, 1-Copper Star Spacer, 1-Long Light Stone Spacer, 1-Pearl, 1-Round
Dark Stone Spacer, 1-Pearl, 1-Copper Star Spacer, 1-Round Light Stone
Spacer, 1-Pearl, 1-Round Dark Stone Spacer, 1-Pearl.
3. Taking both lengths of wire, string them together through the Copper
Focal bead. Finish stringing each length of wire in the reverse pattern
from Step 2.
4. Finish the bracelet by stringing each length, one to each loop on the
straight bar portion of the Toggle Clasp. Secure with crimp tubes and
hide the excess tail back through the first few beads.
|
|
|